Looking for:

Quick Fix: Windows 10 Preparing Automatic Repair Loop – EaseUS.Windows Blue Screen on a Loop – Microsoft Community

Click here to Download


Here, this article is going to walk you through a few steps that you can take to troubleshoot this bluescreen on boot. Sometimes it is easy to fix the blue screen of death. The easiest way is to boot your computer in safe mode if you can’t boot it usually. Go through each device category and scan all of the devices for the telltale yellow accent icon that indicates there’s a device conflict. If this doesn’t help, run a whole scan for the System.

Any help is appreciated. Let us try the below troubleshooting steps and check if it helps. As a workaround I suggest you to unplug all the external devices connected to your computer, hard reboot the device and check with the status of this issue.

If the issue still persists, try the below troubleshooting steps as the boot files of current operating system might got corrupted. I suggest you to download Windows 10 ISO file, create an installation media from other working computer to perform Startup Repair of the computer that you are unable to boot.

Step 1: I suggest you to try Startup Repairing the Windows and check if it helps. Refer to the following link: Installing Windows 10 using the media creation tool.

Step 2: After creating the tool perform Startup Repair. I would like to inform that, if your Windows 10 is not able to boot or startup, Startup Repair will come into action and try to diagnose and fix the issue.

It will scan system files, registry settings, configuration settings and more and try to fix the problem on its own, automatically. Hope it helps. W e will be happy to help you. The last straw to remove Windows 10 reboot loop here is to have a check of your hard drive for physical issues. Here ” Surface Test ” feature of bootable MiniTool Partition Wizard can check every sector of your have drive and give you a report whether there are bad sectors on the drive.

Then select the whole system disk and choose ” Surface Test ” from the action panel. In the pop-up window, click ” Start Now ” to begin hard drive checking.

If there are bad sectors found, they will be marked with red blocks. If there are multiple bad sectors on the drive, you should start a disk backup check Workaround 7 before data loss occurs and install Windows 10 on a new drive.

But if no bad sectors are found and Windows 10 reboot loop persists, contact Microsoft for technician help. Those whose computer keeps restarting Windows 10 should be interested to have a try.

Here comes the end of this post. Hope the above-mentioned methods will help you out and stop endless rebooting issue on Windows You can try these methods even in other versions of Windows operating systems if you face continues rebooting issue on them. If you have any other workaround that has proved to be useful, leave it in the following comment section for the benefit of more users.

If you encounter any problems while using MiniTool software, you can contact [email protected] to get timely help. Download Partition Wizard. Summary : Windows 10 stuck in restart loop is annoying. Tip: Before you start, please go through the entire post first and see which solution may apply to you.

Tip: It is better for you to back up your registry key, avoiding any kind of disaster. To back up, go to ” File ” and click on ” Export… ” Assign a name to the backup and save it to a safe location. Tip: If your PC does not detect the Windows 10 bootable media automatically during the restart process, read the screen for any instructions that lead you to BIOS Setup. Please follow the instructions and use the arrow keys to locate the CD, DVD, or USB flash drive depending on the bootable media you use to the first place in the list.

Now your PC will be able to start from the bootable media. This choice will keep your data, but any programs installed will be lost. Tip: You can also carry out ” Reset your PC “. A blue screen error also called a stop error can occur if a problem causes your device to shut down or restart unexpectedly.

You might see a blue screen with a message that your device ran into a problem and needs to restart. Note: If you are experiencing a black or blank screen error, see Troubleshoot black screen or blank screen errors for more info. The steps in this article are intended to help troubleshoot common stop error codes, such as the following:.



Quickly Solve – Your PC Ran into a Problem and Needs to Restart.

Step 1. Select the system partition to recover files from drive letter can be changed in the boot mode and choose Data Recovery. Once activated, this tool will run several diagnostic tests to self-repair and detect any problems that are preventing your device from successfully booting. During the process, you are able to check each file to see if it is the one you need. How to speed up Windows 11 How to get help in Windows Delivering remote zero-trust network access.